E26/E27, E14, B22d, G5/G13 and E40 Lampcap Torque Meter Measuring range 0-10N.m
1. Introduction
HP-10 digital torque meter is a tool to test the mechanical strength of the lampcap, it can measure the torque value of lampcaps of different luminaires like LED bulb, HID lamp and CFL lamp by equip with different fixtures. The equipment is consisted by secondary meter, torque device and test fixtures (for lampcaps E27/E26, E14/E12, B22d, G5/G13). The peak value and lower value can be preset by touch screen for alarming, and the torque value can be display in real time.
2. Specification
| Control unit |
5-inch LCD touch screen |
| Fixed mode |
Fix the lampcap with the fixture, and rotate the lampcap forward and reverse to measure the torque value of the lamp cap |
| Fixture |
E26/E27, E14, B22d, G5/G13 and E40 (optional) |
| Measuring range |
0-10N.m |
| Resolution |
0.001N.m |
| Test accuracy |
≤1% |
| Repeatability |
≤0.5% FS |
| Linearity |
≤0.5% FS |
| Hysteresis |
≤0.5% FS |
| Overload capacity |
120%FS |
| Temperature Compensation Range |
-10℃~60℃ |
| Working condition |
-0~40℃, ≤75% R.H. |
| Storage condition |
-20℃~50℃, ≤75% R.H. |
| Working Power |
220V±10%, 50Hz/60Hz |
| Power consumption |
15VA |
| Dimension |
305mm*215mm*120mm (L*W*H) |
| Weight: |
Approximate 2.3KG |
3. Frequently Asked Quuestions
1). Does the test carry on finished lamp or lampcap?
Pego: the test is performed on finished lamps.
2). Does the equipment will comes all the mentioned test fixtures?
Pego: the standard configure is inlcudes 26/E27, E14, B22d, G5/G13 test fixtures, E40 is an optional test fixture. When testing lamps with different lamp caps, user need to replace the corresponding test fixtures.
Product Tags:
|
|
E26/E27, E14, B22d, G5/G13 And E40 Lampcap Torque Meter Measuring Range 0-10N.m Images
|
